Fence Contractors in San Bruno, CA
1 fence company in San Bruno publish installed pricing, and across every material they quote the range runs $16 to $78 per linear foot. Aluminum is the cheapest way to fence a yard here at $16 to $26 per foot, which puts a 150-foot run at $2,400 to $3,900.
Price Your Fence in San Bruno
Draw your fence line on a satellite map to get a length and a cost range for this property.
Loading Fence Planner...
Enter your address to get started
We'll show a satellite view of your property so you can draw fence lines.
Fence Cost by Material in San Bruno
Installed cost per linear foot, taken from the published rates of the 1 contractor listed on this page, with each material set against the California average.
| Material | San Bruno /ft | 150 ft installed | vs CA | Quotes |
|---|---|---|---|---|
| Vinyl | $53 to $78 | $7,950 to $11,700 | about 50% above | 1 |
| Aluminum | $16 to $26 | $2,400 to $3,900 | about 51% below | 1 |
| Composite | $22 to $45 | $3,300 to $6,750 | about 22% below | 1 |
Figures are installed prices before gates, permits, and removal of an existing fence. Materials with only one or two local quotes will move as more companies list pricing.
Fence Companies in San Bruno
Contractors Nearby
Oakland, CA ~14 mi
San Carlos, CA ~12 mi
San Francisco, CA ~10 mi
1325 Evans Ave, San Francisco, California
Belmont, CA ~11 mi
Burlingame, CA ~4 mi
Hiring a Fence Installer in San Bruno
Quotes in San Bruno vary by more than material. Post depth has to clear the local frost line, sloped lots need stepped or racked panels, and tearing out an old fence is usually billed separately. Ask every company whether the number covers haul-away, permit filing, and utility locates before you compare it against anyone else's.
The spread here is wide: aluminum starts at $16 per foot while vinyl reaches $78. On a 150-foot run that is a difference of roughly $9,300.