FairFences

Fence Contractors in Tucker, GA

1 fence company in Tucker publish installed pricing, and across every material they quote the range runs $18 to $46 per linear foot. Metal is the cheapest way to fence a yard here at $18 to $38 per foot, which puts a 150-foot run at $2,700 to $5,700.

Price Your Fence in Tucker

Draw your fence line on a satellite map to get a length and a cost range for this property.

Fence Cost by Material in Tucker

Installed cost per linear foot, taken from the published rates of the 1 contractor listed on this page, with each material set against the Georgia average.

Material Tucker /ft 150 ft installed vs GA Quotes
Aluminum $33 to $46 $4,950 to $6,900 in line with 1
Metal $18 to $38 $2,700 to $5,700 about 39% below 1

Figures are installed prices before gates, permits, and removal of an existing fence. Materials with only one or two local quotes will move as more companies list pricing.

Fence Companies in Tucker

1800 Montreal Cir, Tucker, Georgia

Aluminum Metal

Contractors Nearby

Atlanta, GA ~12 mi

7000 Peachtree Dunwoody Rd, Atlanta, Georgia

Wood Bamboo

4627 Roswell Rd, Atlanta, Georgia

Composite Aluminum Metal

Atlanta, Georgia

Wood Vinyl Composite

6204 Chastain Dr NE, Atlanta, Georgia

Wood Cedar Vinyl Aluminum

3050 Amwiler Road, Atlanta, Georgia

Bamboo Composite Cedar Aluminum

1345 Piedmont Avenue Northeast, Atlanta, Georgia

Bamboo Metal

Atlanta, Georgia

Aluminum Cedar Vinyl

4301 Roosevelt Hwy, Atlanta, Georgia

Cedar Wood

3325 E Wood Valley Rd NW, Atlanta, Georgia

Aluminum Cedar Wood

3017 Bolling Way NE, Atlanta, Georgia

Bamboo Composite Metal

3325 Paces Ferry Rd NW, Atlanta, Georgia

Cedar Wood Vinyl Aluminum

7000 Peachtree Dunwoody Rd, Atlanta, Georgia

Cedar Aluminum Metal Composite

Duluth, GA ~11 mi

6555 Sugarloaf Pkwy NW, Duluth, Georgia

Bamboo Cedar Metal

Alpharetta, GA ~16 mi

Alpharetta, Georgia

Metal Aluminum Composite Cedar

Alpharetta, Georgia

Metal Vinyl

Smyrna, GA ~17 mi

Smyrna, Georgia

Cedar Metal Bamboo

Peachtree Corners, GA ~8 mi

250 Scientific Dr, Peachtree Corners, Georgia

Composite Metal Aluminum

Hiring a Fence Installer in Tucker

Quotes in Tucker vary by more than material. Post depth has to clear the local frost line, sloped lots need stepped or racked panels, and tearing out an old fence is usually billed separately. Ask every company whether the number covers haul-away, permit filing, and utility locates before you compare it against anyone else's.

The spread here is wide: metal starts at $18 per foot while aluminum reaches $46. On a 150-foot run that is a difference of roughly $4,200.