CDA Paving and Concrete Specialties
Fence contractor in Coeur d'Alene, Idaho
CDA Paving and Concrete Specialties quotes 3 fence materials in Coeur d'Alene, starting at $33 per linear foot for bamboo. A 150-foot run at that rate works out to $4,950 to $7,200 installed. That tracks the going rate for bamboo in Coeur d'Alene.
Published Pricing
Installed cost per linear foot, as published by CDA Paving and Concrete Specialties, next to what the rest of the Coeur d'Alene market charges for the same material.
| Material | This contractor | Coeur d'Alene range | Standing |
|---|---|---|---|
| Aluminum | $45 to $70 | $45 to $70 | 36% over the local average |
| Bamboo | $33 to $48 | $33 to $48 | around the local average |
| Metal | $49 to $61 | $49 to $61 | 34% over the local average |
Prices are per linear foot installed and exclude gates, permits, and removal of an existing fence. Confirm scope directly with the contractor before comparing quotes.
Contact & Service Details
- Address
- 120 E Anton Ave, Coeur d'Alene, ID, 83815-3717
- Phone
- +1 208-714-0424
- Materials installed
- Bamboo, Aluminum, and Metal
- Website
- Visit Website
About CDA Paving and Concrete Specialties
Coeur d'Alene Paving : We are the only locally owned and operated paving company in North Idaho. We started with one paver in 2001 and sixteen years later have become an industry leader. Long time resident, Todd Kaufman, created Coeur d'Alene Paving and was joined by his lifelong friend Craig Cozad in 2004. Their vision for success has been the foundation of our continuous growth. Today we have an asphalt plant, a concrete plant, and three gravel pits to serve Coeur d'Alene, Spokane and the Silver Valley. Our extensive portfolio includes the prestigious Coeur d'Alene Resort, interstate 90 renovations and thousands of residential driveways. CDA Redi Mix & Precast, Inc. : Locally owned and operated out of our batch plant at Stateline. We are a division of Coeur d'Alene Paving, a regional leader in paving since 2001. Founders Todd Kaufman and Craig Cozad dreamed of owning a concrete plant for over a decade after identifying a need for high performance Redi Mix in the local community. CDA Redi Mix began its inaugural year in 2016. In 2017, we acquired the license to manufacture and distribute Verti-Block in our region and our journey into precast began. Our unparalleled growth in North Idaho and Eastern Washington is rooted in a commitment to rock solid service. Our approach is simple; to provide each and every customer the best Redi Mix concrete when they need it. We build close customer relationships that set us apart from our competitors by listening to needs, understanding challenges and providing valuable solutions. Our concrete team can help analyze your project and provide an innovative mix design to fit your project to ensure maximum performance. Our mission is to not only provide you the material to create a beautiful project, but to make the process enjoyable from start to finish while exceeding your expectations.
Get a quote from CDA Paving and Concrete Specialties
Measure your fence line on the planner and we will pass the details to CDA Paving and Concrete Specialties and other Coeur d'Alene installers.