FairFences

Fence Contractors in Park Ridge, IL

1 fence company in Park Ridge publish installed pricing, and across every material they quote the range runs $17 to $76 per linear foot. Metal is the cheapest way to fence a yard here at $17 to $41 per foot, which puts a 150-foot run at $2,550 to $6,150.

Price Your Fence in Park Ridge

Draw your fence line on a satellite map to get a length and a cost range for this property.

Fence Cost by Material in Park Ridge

Installed cost per linear foot, taken from the published rates of the 1 contractor listed on this page, with each material set against the Illinois average.

Material Park Ridge /ft 150 ft installed vs IL Quotes
Wood $51 to $76 $7,650 to $11,400 about 56% above 1
Composite $48 to $59 $7,200 to $8,850 about 26% above 1
Metal $17 to $41 $2,550 to $6,150 about 31% below 1

Figures are installed prices before gates, permits, and removal of an existing fence. Materials with only one or two local quotes will move as more companies list pricing.

Fence Companies in Park Ridge

111 S Washington Ave, Park Ridge, Illinois

Wood Composite Metal

Contractors Nearby

Elk Grove Village, IL ~7 mi

189 Gordon St, Elk Grove Village, Illinois

Cedar Metal

655 Lively Blvd, Elk Grove Village, Illinois

Metal Bamboo Aluminum Composite

Melrose Park, IL ~8 mi

3132 W Hirsch St, Melrose Park, Illinois

Bamboo Metal

Melrose Park, Illinois

Aluminum Metal Bamboo

5009 W Lake St, Melrose Park, Illinois

Composite Metal Wood Vinyl

5009 W Lake St, Melrose Park, Illinois

Composite Aluminum

Northbrook, IL ~8 mi

3177 MacArthur Blvd, Northbrook, Illinois

Composite Aluminum Vinyl

Arlington Heights, IL ~9 mi

855 W University Dr, Arlington Heights, Illinois

Cedar Bamboo Aluminum Wood

3027 Malmo Dr, Arlington Heights, Illinois

Aluminum Bamboo Metal

Des Plaines, IL ~3 mi

515 Jarvis Ave, Des Plaines, Illinois

Cedar Metal Bamboo Composite

Hiring a Fence Installer in Park Ridge

Quotes in Park Ridge vary by more than material. Post depth has to clear the local frost line, sloped lots need stepped or racked panels, and tearing out an old fence is usually billed separately. Ask every company whether the number covers haul-away, permit filing, and utility locates before you compare it against anyone else's.

The spread here is wide: metal starts at $17 per foot while wood reaches $76. On a 150-foot run that is a difference of roughly $8,850.