FairFences

Fence Contractors in Federal Way, WA

2 fence companies in Federal Way publish installed pricing, and across every material they quote the range runs $19 to $78 per linear foot. Aluminum is the cheapest way to fence a yard here at $19 to $35 per foot, which puts a 150-foot run at $2,850 to $5,250.

Price Your Fence in Federal Way

Draw your fence line on a satellite map to get a length and a cost range for this property.

Fence Cost by Material in Federal Way

Installed cost per linear foot, taken from the published rates of the 2 contractors listed on this page, with each material set against the Washington average.

Material Federal Way /ft 150 ft installed vs WA Quotes
Vinyl $20 to $48 $3,000 to $7,200 about 25% below 2
Wood $52 to $74 $7,800 to $11,100 about 39% above 1
Aluminum $19 to $35 $2,850 to $5,250 about 35% below 1
Bamboo $47 to $58 $7,050 to $8,700 about 22% above 1
Composite $53 to $71 $7,950 to $10,650 about 36% above 1
Metal $53 to $78 $7,950 to $11,700 about 41% above 1

Figures are installed prices before gates, permits, and removal of an existing fence. Materials with only one or two local quotes will move as more companies list pricing.

Fence Companies in Federal Way

27802 Pacific Hwy S, Federal Way, Washington

Metal Vinyl Aluminum Wood

33020 10th Ave SW, Federal Way, Washington

Bamboo Vinyl Composite

Contractors Nearby

Des Moines, WA ~6 mi

Des Moines, Washington

Bamboo Metal

Puyallup, WA ~9 mi

10902 62nd Ave E, Puyallup, Washington

Cedar Vinyl Composite Aluminum

10412 John Bananola Way E, Puyallup, Washington

Vinyl Aluminum Metal Bamboo

SeaTac, WA ~9 mi

14420 Des Moines Memorial Dr S, SeaTac, Washington

Vinyl Cedar Wood

Kent, WA ~5 mi

Kent, Washington

Bamboo Cedar Aluminum Metal

Kent, Washington

Metal Composite Wood

Auburn, WA ~4 mi

214 21st St SE, Auburn, Washington

Cedar Wood Aluminum Bamboo

3420 Auburn Way N, Auburn, Washington

Vinyl Bamboo Metal Composite

Hiring a Fence Installer in Federal Way

Quotes in Federal Way vary by more than material. Post depth has to clear the local frost line, sloped lots need stepped or racked panels, and tearing out an old fence is usually billed separately. Ask every company whether the number covers haul-away, permit filing, and utility locates before you compare it against anyone else's.

The spread here is wide: aluminum starts at $19 per foot while metal reaches $78. On a 150-foot run that is a difference of roughly $8,850.